It’s happened to the best of us – you go to start your ATV and your ATV won’t turn over. Before you start panicking, there are a few things you can check to see what might be the problem.
If you’re an ATV enthusiast, there’s nothing worse than heading out on a ride only to find that your ATV won’t start. It can be frustrating and even dangerous if you’re in the middle of nowhere.
However, before you panic and call a mechanic, there are a few things you can do to troubleshoot the problem. In this article, we’ll go over some common reasons why your ATV won’t start and provide some solutions to help get you back on the trail.
Common Reasons Why Your ATV Won’t Start
Here are some common reasons why your ATV won’t start:
One of the most common reasons why an ATV won’t start is a dead battery. This can happen if you haven’t used your ATV in a while or if you left the lights on for an extended period. To determine if the battery is the issue, try jump-starting your ATV with another vehicle or a portable jump-starter. If your ATV starts, it’s likely that the battery was the problem.
Dirty Air Filter
If your ATV has a dirty air filter, it can restrict airflow to the engine and prevent it from starting. Check your air filter and clean or replace it if it’s dirty. It’s a good idea to clean your air filter regularly to prevent this issue from happening in the future.
Bad Spark Plug
The spark plug is responsible for igniting the fuel in the engine, and if it’s faulty, your ATV won’t start. Check your spark plug and replace it if necessary. It’s a good idea to replace your spark plug regularly to ensure that it’s in good working order.
If your ATV has been sitting for a while, the fuel in the tank can go bad and prevent your ATV from starting. It’s also possible that your ATV isn’t getting fuel due to a clogged fuel filter or a faulty fuel pump. Check your fuel system and replace any faulty parts.
If your ATV won’t start and none of the above solutions work, it’s possible that you have an electrical issue. Check your wiring and connections to ensure that everything is in good working order. If you’re not comfortable working with electrical systems, it’s best to take your ATV to a mechanic.
Solutions to Try When Your ATV Won’t Start
And here are the solution you will be needing:
Check the Battery
If your ATV won’t start, the first thing you should check is the battery. If the battery is dead, you’ll need to charge or replace it. If the battery is old, it may need to be replaced.
If the battery isn’t the problem, then you’ll need to check the spark plug. If the spark plug is fouled or damaged, it will need to be replaced.
If neither of these are the problem, then it’s likely that there is an issue with the fuel system. Make sure that there is fresh gas in the tank and that the fuel filter isn’t clogged.
Check the Fuse
If your ATV won’t start, the first thing you should check is the fuse. The fuse protects the electrical system from overloads and shorts, and if it’s blown, the ATV won’t have power. To check the fuse, simply remove it from the ATV’s fuse box and look at it. If it’s melted or broken, replace it with a new one.
Check the Spark Plug
If your ATV won’t start, one of the first things you should check is the spark plug. A spark plug that is old, fouled, or damaged can prevent your ATV from starting.
To check the spark plug, remove it from the engine and inspect it. If the spark plug is old or damaged, replace it with a new one. If the spark plug is fouled, clean it with a wire brush or spray cleaner.
Once you’ve checked (or replaced) the spark plug, reattach it to the engine and try starting the ATV again.
Check the Fuel
If your ATV won’t start, the first thing you should check is the fuel. Make sure there is gas in the tank and that the fuel lines are not clogged. If the fuel looks dirty, it may be time to clean the carburetor.
Check the Kill Switch
Many ATVs have a kill switch that prevents the engine from starting if it’s not in the correct position. Make sure your kill switch is in the correct position before attempting to start your ATV.
Clean the Carburetor
If your ATV is older or has been sitting for a while, the carburetor may be dirty and preventing your ATV from starting. Clean the carburetor or have a mechanic do it for you.
Check the Ignition System
If your ATV won’t start, it’s possible that you have an issue with the ignition system. Check your ignition switch, starter motor, and solenoid to ensure that everything is in good working order.
Replace the Starter
If your ATV won’t start and you hear a clicking sound, it’s possible that the starter is faulty. Replace the starter or have a mechanic do it for you.
Get a Tune-Up
If you’ve tried all of the above solutions and your ATV still won’t start, it’s time to take it in for a tune-up. A mechanic can diagnose the problem and make any necessary repairs to get your ATV running again.
Call a Mechanic
If your ATV won’t start, the first thing you should do is call a mechanic. A qualified mechanic will be able to diagnose and repair the problem quickly and efficiently. However, if you’re not sure whether or not your ATV needs a mechanic, there are a few things you can check yourself.
If your ATV won’t start, don’t panic. There are many common reasons why an ATV won’t start, and many of them can be fixed with some basic troubleshooting. Check your battery, air filter, spark plug, fuel system, and wiring to ensure that everything is in good working order. If all else fails