If you have an ATV won’t start when cold outside, there are a few things you can do to try and fix the issue. First, check the battery to make sure it has enough power.
If the battery is dead, try jump-starting it from another vehicle. If that doesn’t work, you may need to replace the battery. Next, check the spark plugs to see if they need to be replaced.
If they’re old or fouled, they may not be firing properly, which could prevent the ATV from starting. Finally, check the fuel system to make sure there’s no debris in the fuel line or tank that could be preventing the ATV from getting fuel.
Why an ATV Won’t Start When Cold
Reasons why an ATV won’t start when cold There are several reasons why an ATV may have trouble starting in cold weather. Here are some of the most common ones:
Fuel system issues Cold weather can cause fuel to become thicker and less viscous, making it harder to flow through the fuel system. This can result in difficulty starting the engine.
Battery problems Cold weather can reduce the capacity of a battery, making it harder to start the engine. This is especially true for older or weaker batteries.
Ignition system problems Faulty spark plugs or ignition coils can cause difficulty starting the engine, especially in cold weather.
Carburetor problems A carburetor that is not adjusted properly can cause difficulty starting the engine, especially in cold weather.
How to Fix an ATV That Won’t Start when Cold
If your ATV won’t start when cold, there are a few things you can do to try to fix the problem. First, check the battery to make sure it is fully charged. If the battery is low, try charging it or replacing it with a new one.
Next, check the spark plug to see if it is fouled or damaged. If so, clean or replace the spark plug. Finally, check the fuel system to make sure there is no dirt or debris blocking the fuel line. If all of these things check out, then you may need to take your ATV to a mechanic for further diagnosis.
Tips for Starting an ATV in the Cold
1. Make sure the ATV is on level ground before attempting to start it.
2. Check the oil level and make sure it is full. A low oil level can cause starting problems in cold weather.
3. Check the gas tank and make sure there is enough fuel. Again, a low fuel level can cause starting problems in cold weather.
4. If the ATV has an electric starter, make sure the battery is fully charged. A weak battery can also cause starting problems in cold weather.
5. If the ATV has a manual choke, make sure it is in the correct position for starting in cold weather. Consult your owner’s manual for specific instructions on this.
6. Finally, if all else fails, try starting the ATV with a little help from a friend or by using a starter rope attached to another vehicle or piece of machinery
Best practices for maintaining an ATV to prevent cold starting issues
Preventing cold starting issues is often easier than fixing them. Here are some best practices for maintaining your ATV to prevent cold starting issues:
Keep the ATV stored in a warm, dry place
Storing your ATV in a warm, dry place can help prevent fuel and battery problems that can cause cold starting issues.
Use a block heater
A block heater can help warm up the engine before starting, making it easier to start in cold weather.
Use high-quality oil and fuel
Using high-quality oil and fuel can help prevent fuel and ignition system problems that can cause cold starting issues.
Conclusion
If your ATV won’t start when cold, there are a few things you can do to try and troubleshoot the issue.
First, check the battery to make sure it has enough power. If not, try charging it or replacing it. Next, check the spark plugs to see if they need to be cleaned or replaced.
Finally, check the fuel system to make sure there is no ice in the line. If all of these things fail, then you may need to take your ATV to a mechanic for further diagnosis.
source
