If you are an ATV owner, you may have encountered a situation where your ATV won’t start has spark. This issue can be frustrating, especially if you are ready to ride or need to get work done.
In this guide, we’ll explore the possible causes of an ATV not starting with spark and how to troubleshoot the issue.
Importance of Troubleshooting ATV Won’t Start has Spark
When your ATV won’t start, it can be tempting to assume that it’s a dead battery or starter motor problem.
However, if you have verified that your ATV won’t start has spark, the problem may lie elsewhere. Troubleshooting the issue can save you time and money by preventing unnecessary part replacements and trips to the mechanic.
Why won’t my ATV start?
If your ATV has spark but won’t start, the problem is most likely with the fuel system. Make sure there is fresh gas in the tank and that the fuel filter is clean. If those are both good, then the next step is to check the carburetor.
Make sure that all of the jets are clear and that the float bowl has enough fuel in it. If you’re still having trouble, then it’s time to take your ATV to a mechanic.
Check the spark plugs
If your ATV won’t start and you’ve checked the fuel and air filters, then it’s time to check the spark plugs. Over time, spark plugs can become fouled with oil, dirt, and other debris, which can prevent them from firing correctly.
To check your spark plugs, remove them one at a time from the engine and inspect them closely. If they’re excessively dirty or damaged, they’ll need to be replaced. You can clean your spark plugs with a wire brush or special cleaner, but it’s usually best to just replace them.
Check the fuel
If your ATV won’t start and you know there’s spark, the next step is to check the fuel. There are a few things that could be going wrong here.
First, check that you have fresh gas in the tank. If the gas is old, it may not be combustible enough to start the engine. Second, check the fuel line to make sure it isn’t clogged or damaged. If it is, gas won’t be able to get to the engine. Finally, check the carburetor to see if it’s getting gas. If not, the problem is probably with the fuel pump.
Check the battery
If your ATV won’t start and you know there’s spark, the next step is to check the battery. If the battery is dead, the ATV won’t start. To check the battery, first make sure it’s properly charged. If it’s not, charge it and try starting the ATV again. If the battery is charged but the ATV still won’t start, you may need to replace it.
Other potential issues
Other potential issues that could be causing your ATV to not start despite having spark include:
-The fuel being used is old or not good quality, and has clogged up the carburetor.
-There is water in the gas.
-The oil level is too low.
-There is something wrong with the electrical system, such as a blown fuse.
Troubleshoot an ATV Won’t Start has Spark
Check for Spark
The first step in troubleshooting an ATV that won’t start with spark is to check for spark. To do this, you’ll need a spark tester or a spare spark plug. Remove the spark plug from the engine and connect the tester or spare spark plug to the spark plug wire.
Turn the engine over and look for a strong, blue spark. If there is no spark or a weak spark, the issue may be a faulty spark plug, ignition coil, or stator.
Check Fuel System
If you have verified that the ATV has spark, the next step is to check the fuel system. To do this, you’ll need to check the fuel tank, fuel lines, fuel filter, and carburetor. Make sure the fuel tank has fresh fuel and the fuel lines are free from blockages.
Check the fuel filter for clogs or debris and clean or replace if necessary. If the fuel filter is clean, remove the carburetor and clean it thoroughly. Reassemble the fuel system and try starting the engine.
Check Air Intake System:
Another possible cause of an ATV not starting with spark is a clogged air intake system. To check this, remove the air filter and inspect it for dirt and debris. Clean or replace the air filter if it’s dirty.
Next, remove the air intake tube and inspect the airbox and throttle body for blockages. Use a cleaner and a soft-bristled brush to clean any debris from the airbox and throttle body. Reassemble the air intake system and try starting the engine.
Conclusion
In this guide, we have explored the possible causes of an ATV not starting with spark and how to troubleshoot the issue. It’s important to troubleshoot the issue properly to save time and money on unnecessary part replacements and trips to the mechanic.
When your ATV won’t start, it’s easy to assume that it’s a dead battery or starter motor problem. However, if you have verified that your ATV won’t start has spark, the issue may lie elsewhere. By troubleshooting the issue yourself, you can save time and money, and get back to riding your ATV.
Regular maintenance of your ATV’s spark plug, air filter, fuel system, and ignition coil can prevent starting issues from occurring. Make sure to change the spark plug and air filter regularly, and keep the fuel system clean and free from debris.
Inspect the ignition coil and stator for any signs of wear or damage and replace them if necessary. By following these tips, you can help ensure that your ATV starts reliably every time.
source
