vvAfter a long day of riding, you finally park your ATV for the night. Tomorrow, you’ll take it out again for another few hours of fun. But when you go to start it up the next day, nothing happens. You may be wondering why your ATV won’t start after sitting and what you can do about it.
In this blog post, we’ll explore some of the reasons why your ATV may not start after sitting and what you can do to fix it. From fuel issues to electrical problems, we’ll help you get to the bottom of why your ATV won’t start and how you can get it running again.
Check the gas
If your ATV won’t start after sitting, the first thing you should check is the gas. Make sure there is enough gas in the tank and that the gas is fresh. If the gas is old, it may have clogged up the carburetor. drains. You can also try adding a fuel stabilizer to the gas to help keep it fresh.
Check the oil
If your ATV won’t start after sitting, the first thing you should check is the oil level. If the oil level is low, add more oil and try to start the ATV again. If the ATV still won’t start, there may be an issue with the fuel system.
Check the fuel line and make sure there is gasoline in the tank. If there is gasoline in the tank, check the carburetor to see if it is clogged.
Check the battery
If your ATV won’t start after sitting, the first thing you should check is the battery. If the battery is dead, it will need to be replaced. You can check the battery by using a voltmeter.
If the voltage is below 12 volts, the battery needs to be replaced. Another way to check the battery is to use a hydrometer. If the specific gravity of the electrolyte is below 1.265, the battery needs to be replaced.
Check the spark plugs
If your ATV won’t start after sitting, the first thing you should check is the spark plugs. If they are dirty or fouled, they may be the cause of the problem.
To clean or replace the spark plugs, you will need to remove the spark plug cap and unscrew the spark plug from the engine.
Once it is removed, inspect the spark plug for any damage or deposits. If it looks clean, you can try reinstalling it and see if that fixes the problem. If not, you may need to replace the spark plug.
Clean the carburetor
If your ATV won’t start after sitting, it’s likely that the carburetor needs to be cleaned. Over time, dirt and debris can build up in the carburetor, causing the engine to run less efficiently.
To clean the carburetor, you’ll need to remove it from the ATV and disassemble it. Clean all of the parts with a carburetor cleaner and a brush. Be sure to pay special attention to the jets, as they can easily become clogged.
Once everything is clean, reassemble the carburetor and reinstall it on the ATV. With any luck, this will fix the problem and your ATV will be running like new again!
Conclusion
There are a few things that could be causing your ATV to not start after sitting. It could be something as simple as the battery needing to be replaced, or it could be something more serious like the engine oil being old and dirty.
Whatever the cause, it’s important to get your ATV checked out by a professional so they can diagnose and fix the problem.
source
